RAKSO - Wire wool grade of fineness medium 1

Application
Wood: For sanding after priming and before applying the first paint layer. The natural grain pattern is greatly enhanced on textured woods.
Paint: Removes old paint layers from antique furniture in combination with paint stripper. Roughens old painted surfaces before applying new paint.
Metal: Cleans copper pipes and copper fittings before soldering. Removes stubborn dirt, surface rust, oil contamination and limescale deposits.
Cleaning: Ideal for removing dirt from garden furniture and blinds. Glass blocks and tiles are effectively cleaned without scratching.

Execution

Fine types numbers 0000, 000 and 00 can be used to smooth wood after staining, spruce up waxed woods with new wax, thoroughly and gently clean plastic blinds and garden furniture and polish aluminium, copper and brass
Medium types numbers 0, 1 and 2 can be used to smooth wood after priming, remove old paints using solvents, sand plasterboard, remove dirt residues from tiles and stone flooring and polish copper piping and fittings before soldering
Coarser types numbers 3, 4 and 5 can be used to enhance natural grain patterns in softwoods (pine, spruce), clean glazing and glass blocks and roughen old paint and coatings
Stark verschmutzte Oberflächen:
Zum Entfernen von Fett oder Öl von Oberflächen, besonders bei hartnäckigen Verschmutzungen.
Reinigung von Glasoberflächen / Fenstern:
Zur Beseitigung von hartnäckigen Ablagerungen wie Rost, Mineralien oder Schmutz von Glas.
ACHTUNG: Hierbei sollte jedoch eine sehr feine Stahlwolle (ab der Feinheitsgrad gelb 00) verwendet werden, um das Glas nicht zu zerkratzen.

Advantage
RAKSO STEEL WOOL is available in nine varieties with a clear colour coding system: YELLOW is for fine types, ORANGE for medium types and RED for coarser types.

Notes
Beim Arbeiten mit Stahlwolle sind Schutzhandschuhe zu verwenden, da die feinen Drähte kleine Hautverletzungen verursachen können.
Zudem sollte man bei der Verwendung in feuchten Umgebungen darauf achten, dass keine Rostbildung auftritt, wenn die Stahlwolle in Kontakt mit Wasser kommt.

Wire wool grade of fineness medium 1

Wire wool grade of fineness medium 1

Description

Technical data

More details

Additional articles

Versions

Often bought together

Sanding sponge siasponge block hard fineness coarse 98x69x26 mm

Sanding sponge 4-sided corundum grain 100 fine 68x100x26 mm

Sanding sponge medium grit/P60 90x100x5 aluminium oxide

Sanding sponge siasponge flex pad medium 120x98x13 mm

Sanding sponge siasponge combination block hard fineness fine 98x69x26 mm

Universal sanding block elast. rubber silicone-free gr. 60 coarse 80x50x20 mm

Sanding sponge siasponge block hard comb. fineness medium 98x69x26 mm

No workshop should be without it:

Wire-stripping pliers PreciStrip16 type 12 52 195

ATORN flat square, stainless 150 x 100 mm in line with DIN 875 precision 1

ATORN corundum abrasive fabric roll (AO) in tear-off box G180 40 mm x 50 m

ATORN steel cutting disc 125x1 mm

ATORN countersink set 90° HSS, extremely unequal pitch 6.3-20.5 mm

Pneumatic micro die grinder 9032 M air consumption 75 l/min length 132 mm

ATORN try square stainless 150 x 100 mm in line with DIN 875 precision 1

ATORN A-Mech 1 assembly glove, size 9

ATORN 6-piece measuring instrument set, wooden case, digital vernier callipers

Cs. + cs. deburring tool set 6 pcs 90° HSS dia. 6.3-20.5 mm in plastic box

Twist drill bit set Sprint Master 19 pcs DIN 338 HSS D 1.0-10.0 mm in box

Twist drill bit set HSS-E Co5 1-10 mm 0.5 mm incremental 19 pieces

ATORN A-Mech 4 assembly glove, size 9

ATORN A-Mech 22 assembly glove, size 9

Prec. cntrsink drill set 5 pcs dia. 6.3/10.4/16.5/20.5/25.0 mm w/ 3 clamp surf.

ATORN twist drill bit set N HSS TiN head DIN 338 1.0-13.0 mm 0.5 in box

ATORN twist drill bit set STEP DRILL type N HSS TiN head 1-10 mm 0.5 in box

T-handle 411 A RA T-handle

ATORN 1/4 inch hexagon socket with flexible blade

ATORN twist drill bit set STEP DRILL type N HSS vaporised 1-10 mm 0.5 in box

ATORN ear plug dispenser

ATORN A-Shield 3 cut protection glove, size 9

Thread limit plug gauge for standard ISO thread DIN 2280 nom. dia. M 6 6H

ATORN A-View 4 safety glasses

ATORN A-View 5 full-vision safety goggles

WERA torque screwdriver T 6 set to 0.6 Nm, fixed blade

ATORN NC machine reamer set, 3.0-12.0 mm, H7, HSSE

Multiclean cleaning cloth roll 1000 pcs 34x37 cm 2 ply blue perforated absorbent

LOCTITE LB 8040 rapid rust remover 400 ml

Octagonal pin punch set 6 pieces dia. 2-8 mm in stand

T-handle 416 RA T-handle Rapidaptor

ATORN VDE screwdriver set, 3 pcs, cross head PH 1-3

ATORN twist drill bit set STEP DRILL type N HSS TiN head 1-10.5 mm 0.5 and CHD

ATORN vernier calipers IP67 electr. 150 mm depth gauge flat

ATORN centre drill set HSSE TiN form A, D=1-1.6-2-2.5-3.15-4-5

Blade scraper Argentax with extra wide handle replaceable blades

Cs. + cs. deburring tool set 6 pcs 90° HSS/TiN 6.3-20.5 mm in plastic box

Protective vice jaw set 125 mm 8 pieces in bag

ATORN quick-change bit holder, 1/4 inch x 60 mm

ATORN HSSE machine tap set M3-12 HSSE GL

ATORN micrometer 0-25 mm, in case

Funnel set 6 pieces dia. 50, 75, 100, 120, 150, 160 mm polyethylene

Profi-line intensive brake cleaner spray can 500 ml pack=15 cans

Prec. countersink set 5 pcs HSS-E Alunit d. 6.3/10.4/16.5/20.5/25.0 mm

Safety goggles MAX C4 lens clear

ATORN countersink set, 60°, HSS, extremely unequal pitch 6.3-20.5 mm

ATORN ret. ring pliers set, 8 pcs A1,A2,A11,A21,J1,J2,J11,J21 in roll-up pouch

Pneumatic metered blow gun 37 A 90 mm pipe POM Rc 1/4 grommet LW 6

HHW twist drill bit set DIN 338 HSS type N dia. 1-13.0 mm in box

ATORN twist drill bit set STEP DRILL type N HSS TiN head 1-13 mm 0.5 and CHD

LOCTITE 270 threadlocker 50 g

ATORN cross-peen hammer 1,000 g with 3-component handle

ATORN PZ screwdriver set, 3 pcs, PZ 1-3, round blade

ATORN hexagonal Allen key set, 9 pieces, 1.5–10 mm, ball head, colourful

ATORN hexagon screwdriver set, ball head set, 5 pieces, 3–8 mm

Safety goggles MAX A1 lens clear

ATORN A-View 3 safety glasses

ATORN HSSE machine tap set M3-12 HSSE DL

ATORN twist drill bit set STEP DRILL type N HSS TiN head 1-13 mm 0.5 in box

KNIPEX precision circlip pliers set, 8 pieces in box

LOCTITE 243 threadlocker 50 g

Digitales Drehmoment Testgerät, 5- 500 Nm 3/4 + 3/8 + 1/2 + 1/4 Zoll

ATORN countersink set, 90°, HSSE, unequal spiral pitch 6.3-25.0 mm

Ergonomic safety double lock knife SECUPRO 625