Hommel Hercules uses cookies to give you the best possible service. By using our services, you agree to the cookie usage and the Privacy Policy .  

ATORN countersink, 90°, HSS, T=3, extremely unequal pitch, 11.5 mm, 3-flat shank

ATORN countersink, 90°, HSS, T=3, extremely unequal pitch, 11.5 mm, 3-flat shank

ATORN countersink, 90°, HSS, T=3, extremely unequal pitch, 11.5 mm, 3-flat shank
Bild
Bild
Bild
Item no: 1012261 208 

Online price:

Still in stock: 1

Application
For producing 90° counterbores up to 1300 N/mm².

Execution
  • profile-ground triple-edge countersink with radial relief, with extremely uneven pitch
  • Tige à 3 surfaces pour le serrage dans un mandrin ou une visseuse sans fil

Advantage
  • radial relief ensures optimum chip breaking
  • Uneven pitch ensures excellent surfaces without chatter marks and minimisation of cutting forces
  • 3-sided shaft ensures very good power transmission and prevents the tool from spinning in the drill chuck or cordless drill


Brand: ATORN
Material to be processed: Universal use
Countersink angle: 90 Degree
Cutting material: HSS
Surface: TiN/ZrN
Number of cutting edges: 3 PCS
Tool holding device: Parallel shank with three tightening surfaces
Spot-facer diameter: 11,5 mm
Tip diameter: 2,8 mm
Shank diameter: 8 mm
Length: 56 mm
f steel 700: 0,1 mm/r
DIN: 335

ATORN-No.: 10420178

EAN no.: 4050293446807

Product Datasheet Datasheet cutting values
Versions
loading
Keywords:

You might also be interested in this

  • ATORN countersink, 90°, HSS, T=3, extremely unequal pitch, 10.0 mm, 3-flat shank
  •
    1/4 inch TX® screwdriver bit set short 9 pieces with holding function
  •
    ATORN countersink, 90°, HSS, T=3, extremely unequal pitch, 12.4 mm, 3-flat shank
  •
    Flachsenker 180° ähnl. DIN 373 zyl. HSS für Gewinde M 3 Senkgüte Dm 6,0x3,4 mm
  •
    FUEL M12 BPD/0 cordless impact drill/driver 12 V 30 Nm (solo w/o batt/charger)
  •
    STAHLWILLE open-end wrench plug-in tool, 19 mm, plug-in square 9x12 mm
  •
    ATORN SC miniature ball nose end mill diameter 1.5x2x5x55 mm T2 HA 4 ULTRA DC
  •
    ATORN solid carbide single-tooth milling cutter HA, 3.0 x 12 x 22 x 50 mm, plain
  •
    ATORN countersink, 90°, solid carbide, T=3, extremely unequal pitch, 12.4 mm
  •
    ATORN countersink, 90°, HSS, T=3, extremely unequal pitch, 4.3 mm, 3-flat shank
  •
    Scotch-Brite coarse clean. disc XT-DC D 150 mm pack = 2 pcs without cl. mandrel
  •
    Cutting insert TDT4E-0.4 H 20 double-edged w. chip former type -T-

Frequently bought together

  • ATORN stepped drill bit core hole centring, type N, HSS M10 10.5 mm HA
  •
    ATORN stepped drill bit core hole centring, type N, HSS M6 6.4 mm HB
  •
    ATORN stepped drill bit core hole centring, type N, HSS M5 5.3 mm HB
Herstellerinformationen