Application
The universal model is suitable for every locksmith, forge or repair workshop.

Execution

• Basic body and bending arm cast from spheroidal graphite iron (no grey cast iron) and milled
• For this reason, the machine provides optimum bending performance despite its low tare weight

Advantage

• Thanks to the use of high-grade steel that has undergone heat treatment, the dimensions of the bending jaws can be kept small
• Very tight Z- and U-bends are therefore possible
• For the same reason, this equipment can be used to perform warm bending in addition to cold bending
• No special jaws are required for warm bending!

Delivery
- 1 KARNASCH angle bender WB 100 E
- 1 sharp edged jaw
- 1 radius jaw r = 4
- 1 length stop
- 1 bend stop

Notes
* Bending performance relates to material cross-sections with a strength of 40 N/mm.
The types of bending performance available are limited to bending using the mounted radius jaw. This model is also supplied with a sharp-edged jaw, which can only be used for bending sheets up to 2 mm thick. If stronger material needs to be bent at a sharp angle, then the wide, fixed panel no. 5 is required, as this jaw is not hollowed out so much in the angle.
** Special jaws no. 4, no. 5 and no. 6 are required for these materials.